Ziptrak Central Locking

This fantastic innovation to the Ziptrak system will make operating Ziptrak blinds even easier for your customers and is available as an option for Ziptrak blinds with the exposed aluminium bottom bar!

The new central lock release mechanism is mounted inside the recess of the aluminium bottom bar and consists of a handle which retracts a locking tongue on each end of the bottom rail by pulling it in the up direction.  The retraction of the locking tongues allows the bottom bar guide to move past a mechanical stop mounted on the face of the bracket channel.

The handle can be pulled up either by hand or by using a pull stick, which eliminates the need to bend down in order to lift up the blind. By pushing the bottom rail down to its locking position the tongues will retract over the mechanical stops and then automatically spring out again at the locking position.

The operating handle of the new locking release mechanism can also be mounted in an offset to the centre position to overcome obstacles.

In the near future Ziptrak will also launch an optional reverse handle to release the lock from both sides of the blinds, and special mechanical stoppers for face fix installations.