|
|
||||||||||||||||||||||||
|
Slide Track BlindsShade & PrivacySlideTrack sun screens provide effective shading and screening solutions for commercial and domestic applications |
||||||||||||||||||||||||
StylishSlideTrack Blinds are designed to be unobtrusive and present clean functional lines. With a wide color range, shades will complement the appearance of your property. |
|||||||||||||||||||||||||
Simple DesignOne-handed operation with a central locking position means SlideTrack Blinds are a breeze to roll up and down. No ropes pulleys, zippers or straps. The fabric is held in tracks both sides and a sealing strip at the bottom helps keep leaves and insects out. |
|||||||||||||||||||||||||
DurableExposed parts are made from stainless steel and aluminium. Joins are high frequency welded, not stitched. |
|||||||||||||||||||||||||
Phone QuoteTake some rough measurements and phone (08) 83841291 for a quote over the phone.
|
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||
WarrantySlideTrack Blinds come with a five year warranty, conditions apply. |
|||||||||||||||||||||||||
Motorised OptionSlideTrack can be fitted with a hand crank or motorised if needed. |
|||||||||||||||||||||||||
Clear PVCSlide Track can also be made from clear PVC. |
|||||||||||||||||||||||||
Features & Benifits• The fabric is held in tracks on both sides. This prevents excessive fabric movement and noisy flapping, and provides a seal on both sides. As the fabric does not need to be tightly stretched, the longevity of the product is improved. • The centrally-located locking mechanism makes Slidetrack blinds easy to use. Customers can raise, lower and lock blinds into position one-handed and without needing to move around the blind. • Intermediate locking positions can be easily provided, so that blinds may be set at an ideal shading height. Customers with multiple blinds can select an intermediate position which allows their blinds to line up neatly. The installer simply drills new locking holes on site to the customer’s requirement. • The bottom bar is made from aluminium and internal components are stainless steel. Since the top tube is also aluminium, Slidetrack blinds are ideal for coastal environments when used with stainless steel brackets. • A vee-seal at the base of the bottom bar is provided as standard to prevent marking customers’ floor surfaces; this can be removed, or replaced with a valance on site if required. • The blinds are designed to be unobtrusive and present clean, functional lines. The edge spline is largely concealed, avoiding introduction of another colour. • The bottom bar is held within full length channels on both sides, resulting in a very strong design. Any wear marks which occur over time are hidden. • Adjustment for out-of-square is provided by adjusting the tracks on the mounting channels during installation. An optional deep channel is available to assist in awkward mounting applications, such as post saddles or walls with exposed copper pipes. SIZE RANGE: Slidetrack blinds operate well with drops up to three metres and spans up to four metres. Customers should be made aware that blinds of
this type will exhibit some central fabric looseness when in a partly open position.
This is due to the fabric rolling tightly on the splines on both sides of the
top tube, but laying loosely in the centre. This effect is exacerbated with wider
blinds, and may give the appearance that the top tube is bowing. |
|||||||||||||||||||||||||
Cafe BlindsClick here to see other styles of cafe blinds |
|||||||||||||||||||||||||
|
Menzel Plastics has been helping domestic and commercial customers with goods, services and product sourcing in Australia for over 50 years, with over 6000 products including irrigation equipment pumps and fittings, we can supply goods Australia wide. -- Call or visit our friendly staff for old fashioned service with a smile."
"Our mission statement is -- Make it easy with Menzels!"
Menzel Plastic Traders Pty LtdACN : 44098957398sales@menzelplastics.com.au